Контрольная работа по "Английскому языку"

 

Определите, является ли утверждение

The next point to notice is that the gears are normally free to rotate on the main shaft.

 

ВАРИАНТЫ ОТВЕТОВ:

 

A	ложным	B	истинным
C	в тексте нет информации

 

ЗАДАНИЕ № 26 (- выберите один вариант ответа)

Прочитайте текст и выполните  заданиe

Clutch

The clutch enables the operator to control the power of the engine, to connect the power to gears and shafts which carry it to drive wheels, and to disconnect the engine power from these parts when desired. There are several types of clutches in use: mechanical, hydraulic, electromagnetic. Clutches can also be divided into single-plate, double-plate and multi-plate units.

The clutch is attached to the rare face of the flywheel. When the clutch plate is turning with the flywheel, the clutch is engaged. When it is not turning, the clutch is released.

The engine clutch consists of two plates or two sets of plates held in contact with each other by powerful springs or levels. One of the two plates or sets of plates is driven by the engine: the other is locked with the gears of the gearbox by means of a shaft.

The clutch is usually operated by means of a foot pedal or a hand lever. By pressing the clutch pedal the two plates are forced apart against the pressure of springs, so that the plate connected to the engine can rotate without driving the plate connected to the gearbox. When the clutch is released the gear shift lever can be used to select one of several speed ratios. When the clutch is engaged again, the drive to the rear wheels or tracks is complete, and the vehicle moves.

 

Определите, является ли утверждение:

When the clutch plate is not turning, the clutch is released.

ВАРИАНТЫ ОТВЕТОВ:

 

A	ложным	B	истинным
C	в тексте нет  информации

 

ЗАДАНИЕ № 27 (- выберите один вариант ответа)

Прочитайте текст и выполните  заданиe

Clutch

1) The clutch enables the operator to control the power of the engine, to connect the power to gears and shafts which carry it to  drive wheels, and to disconnect the engine power from these parts when desired. There are several types of clutches in use: mechanical, hydraulic, electromagnetic. 2) Clutches can also be divided into single-plate, double-plate and multi-plate units.

The clutch is attached to the rare face of the flywheel. When the clutch plate is turning with the flywheel, the clutch is engaged. When it is not turning, the clutch is released.

3) The engine clutch consists of two plates or two sets of plates held in contact with each other by powerful springs or levels. One of the two plates or sets of plates is driven by the engine: the other is locked with the gears of the gearbox by means of a shaft.

4) The clutch is usually operated by means of a foot pedal or a hand lever. By pressing the clutch pedal the two plates are forced apart against the pressure of springs, so that the plate connected to the engine can rotate without driving the plate connected to the gearbox. When the clutch is released the gear shift lever can be used to select one of several speed ratios. When the clutch is engaged again, the drive to the rear wheels or tracks is complete, and the vehicle moves.

Укажите, какой части текста (1, 2, 3,4) соответствует следующая информация:

 

Clutches can also be divided into single-plate, double-plate and multi-plate units.

 

ВАРИАНТЫ ОТВЕТОВ:

 

A	1	B	2
C	3	D	4

    

ЗАДАНИЕ № 28 (- выберите один вариант ответа)

Прочитайте текст и выполните  заданиe

Clutch

1) The clutch enables the operator to control the power of the engine, to connect the power to gears and shafts which carry it to  drive wheels, and to disconnect the engine power from these parts when desired. There are several types of clutches in use: mechanical, hydraulic, electromagnetic. 2) Clutches can also be divided into single-plate, double-plate and multi-plate units.

The clutch is attached to the rare face of the flywheel. When the clutch plate is turning with the flywheel, the clutch is engaged. When it is not turning, the clutch is released.

3) The engine clutch consists of two plates or two sets of plates held in contact with each other by powerful springs or levels. One of the two plates or sets of plates is driven by the engine: the other is locked with the gears of the gearbox by means of a shaft.

4) The clutch is usually operated by means of a foot pedal or a hand lever. By pressing the clutch pedal the two plates are forced apart against the pressure of springs, so that the plate connected to the engine can rotate without driving the plate connected to the gearbox. When the clutch is released the gear shift lever can be used to select one of several speed ratios. When the clutch is engaged again, the drive to the rear wheels or tracks is complete, and the vehicle moves.

 

Укажите, какой части текста (1, 2, 3,4) соответствует следующая информация:

The clutch is usually operated by means of a foot pedal or a hand lever. 

ВАРИАНТЫ ОТВЕТОВ:

 

A	1	B	2
C	3	D	4

 

ЗАДАНИЕ № 29 (- выберите один вариант ответа)

Прочитайте текст и выполните  заданиe

Clutch

The clutch enables the operator to control the power of the engine, to connect the power to gears and shafts which carry it to drive wheels, and to disconnect the engine power from these parts when desired. There are several types of clutches in use: mechanical, hydraulic, electromagnetic. Clutches can also be divided into single-plate, double-plate and multi-plate units.

The clutch is attached to the rare face of the flywheel. When the clutch plate is turning with the flywheel, the clutch is engaged. When it is not turning, the clutch is released.

The engine clutch consists of two plates or two sets of plates held in contact with each other by powerful springs or levels. One of the two plates or sets of plates is driven by the engine: the other is locked with the gears of the gearbox by means of a shaft.

The clutch is usually operated by means of a foot pedal or a hand lever. By pressing the clutch pedal the two plates are forced apart against the pressure of springs, so that the plate connected to the engine can rotate without driving the plate connected to the gearbox. When the clutch is released the gear shift lever can be used to select one of several speed ratios. When the clutch is engaged again, the drive to the rear wheels or tracks is complete, and the vehicle moves.

Ответьте на вопрос:

How many types of clutches are there?

ВАРИАНТЫ ОТВЕТОВ:

A	3	B	6
C	2	D	5

 

ЗАДАНИЕ № 30 (- выберите один вариант ответа)

Прочитайте текст и выполните  заданиe

Clutch

The clutch enables the operator to control the power of the engine, to connect the power to gears and shafts which carry it to drive wheels, and to disconnect the engine power from these parts when desired. There are several types of clutches in use: mechanical, hydraulic, electromagnetic. Clutches can also be divided into single-plate, double-plate and multi-plate units.

The clutch is attached to the rare face of the flywheel. When the clutch plate is turning with the flywheel, the clutch is engaged. When it is not turning, the clutch is released.

The engine clutch consists of two plates or two sets of plates held in contact with each other by powerful springs or levels. One of the two plates or sets of plates is driven by the engine: the other is locked with the gears of the gearbox by means of a shaft.

The clutch is usually operated by means of a foot pedal or a hand lever. By pressing the clutch pedal the two plates are forced apart against the pressure of springs, so that the plate connected to the engine can rotate without driving the plate connected to the gearbox. When the clutch is released the gear shift lever can be used to select one of several speed ratios. When the clutch is engaged again, the drive to the rear wheels or tracks is complete, and the vehicle moves.

Ответьте на вопрос:

How is the clutch operated?

ВАРИАНТЫ ОТВЕТОВ:

A	clutch plate	B	foot pedal
C	speed ratios	D	wheels

 

ЗАДАНИЕ № 31

Составьте  рассказ из 10 – 15 предложений на темы: «The university I study at» «Rostov-  on - Don»

Two years ago I left my secondary school, where I got my education at home. Now I live in the city of Rostov- on - Don and study in the University. In my composition I’ll try to give my opinion on my University. Firstly, I would like to compare DGTU with other universities of our city. It is considered to be the best university of our city and one of the best universities of our country. There are lots of different faculties in our university: they are philology, economy, mathematics and others. Many people get a good education there. I realized that I should study there and my parents wanted me to enter it. Concerning my lecturers-I find them great, because practically all of them are specialists who know more than one foreign language. Everyone has a good command of teaching. Each of them is different and we treat him/her differently. I admire all my teachers, because they are very talented and interesting people.